Product Details
MS Cuplock Scaffolding, Manufacturer, Exporter
| Description |
It is one of the most popular type of scaffolding system. This type of system can serve several purposes. Since, it’s a kind of modular scaffolding, it mostly consists of vertical and horizontal components that users can combine to form a temporary structure suitable for various jobs. These components connect via. a unique circular node locking design, providing users with greater flexibility and safety in their scaffolding designs. It results in faster, cost-saving, lighter, tougher & safer scaffolding construction. It is able to form all shapes of scaffold and staging for construction. It supports by forming a concrete slab system in formwork concrete also. Comprises of two major components along with other auxiliary components. |
|---|
| Vertical | |
|---|---|
|
|
Slangs : Standard |
| Standardly manufactured from 48mm OD (40 NB) (thickness 3.2mm) pipe welded with top & bottom cups at 500mm intervals with top-cup small locking bar welded along the total length with holes drilled at both end corners for spigot-pin connection. As per requirement instead of spigot pin holes, socket of length 150mm from 60mm OD (50 NB) (thickness 3.2mm) pipe can also be installed at the top end. | |
| Standard sizes (in mtr) | No. of top & bottom cups |
|---|---|
| 0.5 | 1 |
| 1 | 2 |
| 1.5 | 3 |
| 2 | 4 |
| 2.5 | 5 |
| 3 | 6 |
| Ledger | |
|---|---|
|
|
Slangs : Horizontal |
| Standardly manufactured from 48mm OD (40 NB) (thickness 3.2mm) pipe welded with ledger blades at both the ends which act as a fixing or connecting part between the verticals. | |
| Standard sizes : 600mm, 900mm, 1150mm, 1450mm, 1750mm & 1950mm | |
| U Jack | |
|---|---|
|
Slangs : Adjustable Stirrup Head / Screw U-Jack |
|
It is used at the top of scaffolding system to provide an additional maximum adjustment of length & is designed to be used in conjunction with adjustable system scaffolding. The main application of it is to hold beams and channels in places, upon which the shuttering plates are placed during the construction. Standardly manufactured from 38mm OD (thickness 3.5mm) pipe almost fully threaded with round jack-nut enclosed & installed with U-head (75 x 75 x 6 x 110 mm) having one hole on one side each at one end. Standard size : 600mm & 900mm |
|
| Base Jack | |
|---|---|
|
Slangs : Adjustable Stirrup Base/Screw Base-Jack |
|
It is used as a starting base for a scaffold, which provides stability by adjusting on uneven ground. It is used at the bottom to provide an additional maximum adjustment of length. Standardly manufactured from 38mm OD (thickness 3.5mm) pipe almost fully threaded with round jack-nut enclosed & installed with base-plate (150 x 150 x 6 mm) having center hole and four corner holes at one end. Standard size : 600mm & 900mm |
|